Configuration and Function Description
Model No.: JN-350B
Specification: 4450*1260*1700mm
Control Section:
Controlled by computer; Applied brand computer with P4 rank, 80G hard drive, 15-inch LCD, remote controller could operate detached from computer avoiding the system halt; Equipped with UPS; PCB board real-time tracking device; Combined aural and visual alarm and menu display system, auto-save all parameters, function of economical running, tin wave would automatic switching along with PCB, outfit with temperature profile measuring system and three thermo-detective wire, which allows arbitrary temperature profile detection;

Spraying Section:
Stepping motor spraying; ST-6 resin nozzle, auto-detect distance, external Constant Pressure tank for solder flux with no vaporization, stable flow, separate with high temperature, easy material-adding and cleaning, design with protection against fire and explosion; Maze-design solder flux collection system, internal suction box, allocated with steel mash filter system and backflow preventer device; Arbitrary spraying distance setting from the front, back as well as the sides(selective partial spraying);

Claw-washing Section:
Auto-cycle claw-washing device(import micro pump with acid proof);
Preheating Section:
Three preheating section, adopt quartz radiator tube which could guarantee quick warming up and high heating efficiency, drawer module design, power wire use the air-socket connection, easy to clean, stainless steel upper heat holding cover, electricity-saving design to avoid heat power spread to the outside, temperature controlled by PID+SSR;
Heat compensation section:
Completely stainless steel fabricated, infrared lamp tube+ high temperature glass heating, power wire with air-socket connection, temp. Controller PID+SSR;

Tin Furnace Section:
Titanium alloy furnace pipe and internal parts, dual-wave design, tin wave motor adopt Italy BM motor, tin wave height setting adopt the Datle transducer; Tin furnace volume 420KG, tin wave width: 80-360mm(Patent Technique), tin dross is only 1/3 of the common wave soldering machine and could save at least US Dollar 22, 000/ year, tin furnace ascend and descend by the turbine bar device, automatic up and down, economy and durable, temperature control PID+SSR; Equipped with exhaust gas collection device;
Cooling Section:
Up and down strong wind cooling, fast cooling with exhaust gas collection outlet;

Conveying Section:
Convey system bear by the Titanium alloy dual-claw, converter control by motor drive, speed controlled by computer operation;
Power Switch:
Allocated with programmable time controller, auto-on/off according to the setting time;
Angle Regulation Configuration:
Front and rear lift-up with external labor-saving adjustable device from the range of 4~7º C, marked by ruling;
Temp. Testing System:
Control system allocate with three-wire curve testing software.

With patented technology, adjustable width of soldering wave from 80-360mm, largely reduce the oxide and control the tin dross

"Infrared Cesium Vapor Lamp + Ceramics heating tube + micro-hot air" modular combination preheating system.

Attached the solder recovery system, which avoid the worry of solder waste and extend the life time for usage of whole furnace soldering.

Perfect nozzle which would satisfy the soldering need of all PCB board within 0.3-0.9KG/8H

Particular drawer type preheater, which allow to draw out each module respectively and easy for learning

Outlay individual constant pressure tank, which helps the soldering flux to spray steadily & evenly and convenient to clean and change.

Technical Parameters